Taparia 1225 / 1225 N water pump pliers are designed for gripping compatible pipes and other components with adjustable jaw opening. 250 mm overall length. Box-joint jaw adjustment. Serrated gripping faces. Covered handles. The supplied pack contains 5 identical water pump pliers.

Taparia WD 1001 is a warding bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 100 mm file length. Bastard-cut teeth. Warding profile. Tang for a compatible handle. The supplied pack contains 10 identical warding bastard-cut file pieces.

Taparia T - 5 is a torx screwdriver for turning matching Torx screws, with an extended blade that reaches into recessed positions. T5 Torx tip. 75 mm blade length. 3.0 mm blade diameter. Transparent green handle. The supplied pack contains 10 identical torx screwdriver pieces.

Taparia 3SQ 3001 is a three-square bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 300 mm file length. Bastard-cut teeth. Triangular profile. Tang for a compatible handle. The supplied pack contains 5 identical three-square bastard-cut file pieces.

Taparia 3SQ 1001 is a three-square bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 100 mm file length. Bastard-cut teeth. Triangular profile. Tang for a compatible handle. The supplied pack contains 10 identical three-square bastard-cut file pieces.

Taparia OGS 8260 is a striking flat screwdriver for slotted-screw work using the striking-cap handle design. 8.0 x 1.2 mm slotted tip. Striking-cap handle. Through-blade striking design. The supplied pack contains 10 identical striking flat screwdriver pieces.

Taparia OGS 8210 is a striking flat screwdriver for slotted-screw work using the striking-cap handle design. 8.0 x 1.2 mm slotted tip. Striking-cap handle. Through-blade striking design. The supplied pack contains 10 identical striking flat screwdriver pieces.

Taparia OGS 1250 is a striking flat screwdriver for slotted-screw work using the striking-cap handle design. 10.0 x 1.5 mm slotted tip. Striking-cap handle. Through-blade striking design. The supplied pack contains 10 identical striking flat screwdriver pieces.

Taparia OGS 1200 is a striking flat screwdriver for slotted-screw work using the striking-cap handle design. 10.0 x 1.2 mm slotted tip. Striking-cap handle. Through-blade striking design. The supplied pack contains 10 identical striking flat screwdriver pieces.

Taparia SSR 27 is a slogging ring spanner for tightening and loosening matching large nuts and bolt heads with a hammer-striking end for high-force maintenance work. 27 mm fastener size. Closed multi-point ring head. Short striking end for hammer-assisted operation. Black phosphate finish.

Taparia SSO 27 is a slogging open-end spanner for tightening and loosening matching large nuts and bolt heads with a hammer-striking end for high-force maintenance work. 27 mm fastener size. Single open-jaw head. Short striking end for hammer-assisted operation. Black phosphate finish.

Taparia 1221 slip-joint pliers are designed for gripping small components with adjustable jaw opening. 150 mm overall length. Two-position slip joint. Serrated gripping jaws. Covered handles. The supplied pack contains 10 identical slip-joint pliers.

Taparia SHH 1800 is a sledge hammer head for fitting to a suitable handle for heavy striking work. 1800 g head weight. Head only; handle not included. Double-ended striking faces.

Taparia SER 55 is a single open-end spanner for tightening and loosening matching large nuts and bolt heads in mechanical and industrial maintenance. 55 mm fastener size. Single open-jaw head. Straight profiled handle. Black phosphate finish.

Taparia 1121-6N side cutting pliers measure 160 mm overall. Side-cutting jaws position the cutting edges for wire work. Sleeved handles provide a covered gripping surface. The pack contains 10 identical side cutting pliers in the specified size.

Taparia 1101-6 side-cutting pliers are designed for manual cutting of suitable wire. 160 mm overall length. Diagonal side-cutting jaws. Covered handles. The supplied pack contains 10 identical side-cutting pliers.

Taparia BS 80 is a screwdriver bit set for assorted screw-driving tasks using the appropriate bit profile and size. 80-piece bit and driver set. 25 mm and 50 mm bit selections. Double-ended bit selections. Ratchet bit-driver handle and storage case.

Taparia 1022 is a professional tool kit for screw-driving, gripping, wire stripping and general workshop maintenance with the listed hand-tool selection. 903I and 810 two-in-one screwdrivers. 831 screwdriver set and 932 screwdriver. WS06 wire-stripping pliers. 1621-8 combination pliers and 1225 water-pump pliers. 200BP ball-pein hammer and 1171 adjustable spanner. Fitted metal storage case.

Taparia PBS32 is a power tool bit set for driving a range of matching screw profiles using compatible power-tool bit holders. 32-piece bit set. Flat, Phillips, hex, Pozidriv, Torx and triwing selections. Quick-release bit holder. Storage case.

Taparia PTB 16 is a plastic tool box with organizer for storing and carrying hand tools and small accessories; tools are not included. Plastic tool-box body. Lid organizer compartments. Carry handle and front latch.

Taparia 1541-8 is a pincers for gripping and end-cutting tasks using the pincer head. 200 mm overall length. End-cutting pincer jaws. Steel handles. The supplied pack contains 5 identical pincers.

Taparia PN 1501 is a pillar narrow bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 150 mm file length. Bastard-cut teeth. Narrow pillar profile. Tang for a compatible handle. The supplied pack contains 10 identical pillar narrow bastard-cut file pieces.

Taparia MF 3001 is a mill bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 300 mm file length. Bastard-cut teeth. Mill-file profile. Tang for a compatible handle. The supplied pack contains 5 identical mill bastard-cut file pieces.

Taparia MF 2001 is a mill bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 200 mm file length. Bastard-cut teeth. Mill-file profile. Tang for a compatible handle. The supplied pack contains 10 identical mill bastard-cut file pieces.

Taparia 815 is a line tester for the line-testing tasks specified by the manufacturer; follow appropriate electrical safety procedures. 180 mm overall length. Green transparent handle. Screwdriver-style test tip. Pocket-clip body. The supplied pack contains 10 identical line tester pieces.

Taparia FC15-200 is a light-duty f-clamp for holding workpieces during assembly, gluing and workshop operations. 200 mm clamping opening. Sliding jaw on a straight rail. Screw-adjusted clamping pad. Handle-operated screw.

Taparia GGL 20C is a lever grease gun for manual grease application through compatible fittings. 200 cc capacity. 11/32-inch piston size. Lever-operated pump.

Taparia KF 3001 is a knife bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 300 mm file length. Bastard-cut teeth. Knife-shaped profile. Tang for a compatible handle. The supplied pack contains 5 identical knife bastard-cut file pieces.

Taparia KF 1001 is a knife bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 100 mm file length. Bastard-cut teeth. Knife-shaped profile. Tang for a compatible handle. The supplied pack contains 10 identical knife bastard-cut file pieces.

Taparia JS 3 is a jack stand pair for supporting a properly raised suitable load on a sound, level surface; follow the manufacturer load-rating instructions. 3-ton rated capacity as marked for the stand model. Two jack stands supplied as one pair. Adjustable support-post design.

Taparia 1442-7C internal bent-nose circlip pliers are designed for installing and removing the corresponding internal or external circlips. 180 mm overall length. 19–60 mm circlip capacity. Internal circlip operation. Bent-nose tips. Sleeved handles. The supplied pack contains 10 identical internal bent-nose circlip pliers.

Taparia HTJ 3 is a hydraulic trolley jack for lifting suitable loads on a sound, level surface; support a raised load with appropriate stands. 3-ton rated lifting capacity. Wheeled trolley-jack body. Manual hydraulic operation.

Taparia HBJ2 is a hydraulic bottle jack for lifting suitable loads within the rated capacity; use appropriate axle stands before working beneath a raised load. 2-ton rated lifting capacity. Vertical hydraulic bottle-jack design. Manual pump operation.

Taparia FC29-250 is a heavy-duty f-clamp for holding workpieces during assembly, gluing and workshop operations. 250 mm clamping opening. Sliding jaw on a straight rail. Screw-adjusted clamping pad. Handle-operated screw.

Taparia HF 3003 is a hand smooth-cut file for controlled surface finishing with the specified smooth-cut hand-file profile. 300 mm file length. Smooth-cut teeth. Rectangular hand-file profile. Tang for a compatible handle. The supplied pack contains 5 identical hand smooth-cut file pieces.

Taparia HF 1003 is a hand smooth-cut file for controlled surface finishing with the specified smooth-cut hand-file profile. 100 mm file length. Smooth-cut teeth. Rectangular hand-file profile. Tang for a compatible handle. The supplied pack contains 10 identical hand smooth-cut file pieces.

Taparia HR 105 is a hand riveter for setting compatible blind rivets with the correct nose piece. 267 mm overall length. Hand-operated riveter. Interchangeable nose pieces stored on the body.

Taparia OC 12 is a hand oil pump for applying lubricating oil to accessible lubrication points. 250 cc capacity. Steel body with powder-coated finish. Manual lever pump. Long dispensing spout. The supplied pack contains 6 identical hand oil pump pieces.

Taparia HR 3001 is a half-round bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 300 mm file length. Bastard-cut teeth. Half-round profile. Tang for a compatible handle. The supplied pack contains 5 identical half-round bastard-cut file pieces.

Taparia HR 1001 is a half-round bastard-cut file for hand filing and dressing surfaces or openings suited to the specified file profile. 100 mm file length. Bastard-cut teeth. Half-round profile. Tang for a compatible handle. The supplied pack contains 10 identical half-round bastard-cut file pieces.

Taparia 1275 is a general-purpose pipe wrench for gripping and turning suitable pipe using the adjustable serrated jaws. 450 mm overall length. 60 mm jaw opening. 25 - 52 mm pipe range. Adjustable Stillson-type jaw. The supplied pack contains 5 identical general-purpose pipe wrench pieces.

Taparia FLRP 2003 is a flat smooth-cut wood rasp for shaping wood with the flat rasp face and the specified cut grade. 200 mm rasp length. Smooth-cut rasp grade. Flat wood-rasp profile. Tang for a compatible handle. The supplied pack contains 10 identical flat smooth-cut wood rasp pieces.

Taparia FLH 2502 is a flat handle second-cut file for hand filing and surface dressing with a flat, second-cut file. 250 mm file length. Second-cut teeth. Flat profile. The supplied pack contains 10 identical flat handle second-cut file pieces.

Taparia FL 3501 is a flat bastard-cut file for hand filing and dressing flat workpiece surfaces and edges. 350 mm file length. Bastard-cut teeth. Flat file profile. Tang for a compatible handle. The supplied pack contains 5 identical flat bastard-cut file pieces.

Taparia FL 1001 is a flat bastard-cut file for hand filing and dressing flat workpiece surfaces and edges. 100 mm file length. Bastard-cut teeth. Flat file profile. Tang for a compatible handle. The supplied pack contains 10 identical flat bastard-cut file pieces.

Taparia FC22-300 is an F-clamp with a 300 mm clamping opening for holding workpieces during assembly and workshop operations. The sliding jaw moves along the rail to set the opening, and the handle-operated screw applies clamping pressure. Its open-sided F-shaped frame gives access around the workpiece.

Taparia KBHM 9X brings together 9 extra-long ball-point hex keys in one metric tool set for manual fastening and loosening. Nine metric keys per set: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm. Extra-long ball-point keys supplied in a holder. Supplied as 5 complete 9-piece sets (45 tools in total).

Taparia KBHI 10X is a extra-long ball-point hex key set for manual fastening with matching hex-socket screws, including angled approach using the ball-point ends. 10 Pcs. Hanger Pkg. Set (1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 & 3/8). Ball-point long arms with straight hex short arms. Hanger holder. The supplied pack contains 5 complete sets, with 10 pieces in each set (50 pieces in total).

Taparia KB 7/32 X is a 7/32 in extra-long ball-point hex key for hex-socket fasteners. The L-shaped body pairs a ball-ended long arm, for angled access, with a straight short hex arm. The pack contains 10 identical extra-long ball-point hex keys in the specified size.

Taparia KB - 6 X is a 6 mm extra-long ball-point hex key for hex-socket fasteners. The L-shaped body pairs a ball-ended long arm, for angled access, with a straight short hex arm. The pack contains 10 identical extra-long ball-point hex keys in the specified size.